CPVC Pipe Fittings

All text and product images are the intellectual property and copyright of Pipestock Limited

WRAS Approved Product - sold by PipestockKey Features / Tech Specs:

  • Material: chlorinated polyvinyl chloride resin
  • WRAS approved
  • WRc tested
  • Operating temperature range: 5°C to 95°C
  • Pressure rated to 16 bar

Basic Fitting Guidelines:

Corzan fittings are joined using CPVC solvent cement which is specially formulated to withstand the same working conditions as the rest of the system. The cement operates by chemically softening the outside of the pipe and the inside of the fittings, creating a long lasting join.

Pipestock recommend following the manufacturer's instructions, therefore the following are guidelines only.

  1. Cut the pipe square using a pipe saw.
  2. Mark the area that the fitting will cover.
  3. Abrade the end of the pipe over a length equal to the depth of the fitting socket.
  4. Abrade the socket of the fitting.
  5. Thoroughly clean the abraded surfaces of both the pipe and fitting.,/li>
  6. Apply the solvent cement.
  7. Insert the pipe into the fitting.
  8. Leave to set for the required time.

Useful Info:

Corzan CPVC fittings are designed to convey hot acids and alkalis at high temperatures, up to a pressure of 16 bar. However, as they are WRAS approved, they are also permitted for use in transporting potable water.

 

If you require any further information then don’t hesitate to ring us here at Pipestock on 0845 634 1053. We’re always happy to help!

More Info Click to Close