Superthread Adaptors

Key Features / Tech Specs:

  • Manufactured by John Guest
  • Metric tube x Superthread
  • Pressure rated to 16 bar
  • Maximum temperature: 65°C

Useful Info:

The threaded ends of these Acetal fittings are designed to be hand tightened and have a maximum torque value of 6.0Nm on 1/8" fittings and 10.0Nm up to 1/2" fittings. Overtightening of the fittings can result in undue stress and failure.

They can be used within compressed air or pneumatic flow and vacuum systems. They have a Superthread end allowing them to be used in conjunction with BSPP, BSPT, NPT, PT and PF fittings. The thread includes a polyurethane seal to ensure an airtight joint is produced without any possibility of the tape seal entering and contaminating the system

Tube inserts must be used with pneumatic applications where pressures are in excess of 10 bar; you should not exceed 16 bar. Suitable for use with Polyethylene, Polyurethane, Nylon tubing as well as soft metal tubings such as copper or mild steel.

If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.