Airpipe Fittings Gen 3

All text and product images are the intellectual property and copyright of Pipestock Limited

AIRpipe compressed air pipework - sold by PipestockKey Features / Tech Specs:

  • Manufactured by AIRpipe
  • Material: aluminium, polymer, carbon steel or stainless steel, dependent on fitting
  • All materials are non-flammable
  • Plain ended and threaded connections available
  • Quick and simple connection
  • Full volume flow design
  • Reusable
  • Sizes 20mm to 80mm available

Basic Fitting Guidelines:

It is always important to read the manufacturer's instructions on how to install AIRpipe fittings. The following procedure is a guideline only and involves the following basic steps:

  1. Mark the aluminium pipe at the S position (according to the diagram and table below) using a marking tool.
  2. Loosen the nut or screw by one or one-and-a-half turns, then insert the pipe. Ensure the pipe is inserted up to the mark made in step 1.
  3. Tighten the fitting with a torque wrench.

AIRpipe Fittings - from Pipestock


Diameter (mm) S Length (mm)
20 49
25 62
40 98
50 112
63 90
80 115


Useful Info:

All AIRpipe fittings can be disconnected and later reused, resulting in greater flexibility and cost savings.

The drop-downs can be fitted at any time and will adapt to changes in the production line.

All of the aluminium fittings have a grey protective coating on the outside.


If you require any further information then don’t hesitate to ring us here at Pipestock on 0845 634 1053. We’re always happy to help!

More Info Click to Close