Georg Fischer 3-Way PVCu Pneumatic Actuated Ball Valve T Port Inch
Technical Specification
- Manufacturers:
- Valve: Georg Fischer
- Actuator: Prisma
- Materials:
- Valve: Unplasticised Polyvinyl Chloride (PVCu)
- Valve Seals: Ethylene Propylene Diene Monomer Rubber (EPDM)
- Actuator Housing: Polyamide
- Sizes: 1/2" to 2"
- Pressure rating: 16 bar at 20°C
- Temperature range: 5°C to 60°C
- Port Configuration: "T" Port
- Power Supply: 24-240V AC/DC
- Connection type: Solvent Weld Union Ends
- Features: IP-67 Protective Housing
- Approvals:
- Actuator: SIL3, ATEX, CE Marked
Description
The pneumatically actuated Georg Fischer 3-way T-port ball valve is designed for automated systems where flow diversion, distribution, or mixing is required within a PVCu pipeline. The T-port configuration allows multiple flow paths depending on valve position, making it suitable for more complex control duties than standard isolation valves.
The Georg Fischer 3-Way T-Port Ball Valve is fitted with EPDM body seals and PTFE ball seals, delivering smooth operation, consistent shut-off and excellent resistance to corrosion and a wide range of chemicals. Solvent weld union ends allow the valve to be securely installed into PVCu pipework using solvent cement, while still enabling full valve demounting for maintenance or system modification. The valve end and union nut geometry is compatible with Georg Fischer Type 546 designs, supporting straightforward upgrades or replacements.
The Prisma Pneumatic Actuator features a lightweight, corrosion-resistant design with a fully protective IP67 housing and is approved to SIL3 and ATEX standards. Spring return operation provides a defined fail-safe position on loss of air supply, while double-acting variants are available on request. Designed specifically for use with thermoplastic valves, the actuator is silicone-free and can be fitted with a wide range of control and feedback accessories, including solenoid valves, positioners and limit switches.
This product is delivered fully assembled, made up from the following parts:
- 1x Georg Fischer PVCu 3-Way T-Port Ball Valve EPDM
- 1x Prisma Pneumatic Actuator (Model dependent on size)
- 1x Georg Fischer 546 EasyFit Mounting Kit
Operating Positions
Key Features & Benefits
- Pneumatic actuation with a fail-safe option: Spring return actuator provides controlled valve position on air failure.
- Premium Georg Fischer PVCu valve body: Lightweight, durable and corrosion resistant.
- EPDM and PTFE sealing system: Provides smooth operation and dependable long-term sealing.
- IP67 actuator housing: Fully protected against dust and water ingress.
- Safety and compliance: SIL3, ATEX and CE marked actuator for safety-critical environments.
Actuator Specifications
| Model Number | PPWS | PP00S | PP10S |
| Size | 1/2" and 3/4" | 1" to 1 1/2" | 2" |
| Actuator Type | Spring Return | Spring Return | Spring Return |
| Max Operational Torque | 17Nm to 165Nm at 6 bar | 17Nm to 165Nm at 6 bar | 17Nm to 165Nm at 6 bar |
| Operating Temperature | -32°C to 90°C | -32°C to 90°C | -32°C to 90°C |
| Air Supply | Up to 8 bar | Up to 8 bar | Up to 8 bar |
| Protection Rating | IP-67 | IP-67 | IP-67 |
| Cycle Time w/o Resistant Torque at 6 bar | 0.15 seconds | 0.2 seconds | 0.3 seconds |
| Rotation Angle | 0° to 90° | 0° to 90° | 0° to 90° |
| Drive Type | Stainless Steel 8-Point Star | Stainless Steel 8-Point Star | Stainless Steel 8-Point Star |
| Star Size | 11mm | 14mm | 17mm |
| Weight | 0.55kg | 1kg | 2.03kg |
Double-acting actuators are available upon request; the actuator appearance may differ depending on the size ordered.
Downloads
If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.
