John Guest drinks dispense fittings and tubing are trusted worldwide in professional beverage systems, from pubs and bars to coffee machines, water filtration systems and vending equipment. Designed around reliable push-fit technology, these components allow fast, tool free installation while delivering a secure, leak tight seal for fluids, beverages and gases.
The range is widely used in draught beer systems, soft drink dispense equipment, water filtration units, reverse osmosis systems, and ice machines. Push-fit connectors are particularly popular in commercial cellar installations because they allow technicians to install or service lines quickly without hot works or specialist tools.
This category brings together the key components used to build and maintain drinks dispense systems, including tubing, push-fit fittings, isolation valves and installation accessories. These products are manufactured using high quality materials such as acetal, polypropylene and LLDPE, providing durability, corrosion resistance and suitability for food and beverage applications. Many products are produced using FDA compliant materials and are supported by declarations of compliance for food contact use, making them ideal for potable water, beer and beverage systems.
LLDPE Tubing for Beer, Water and Beverage Lines
LLDPE tubing forms the backbone of many drinks dispense systems. These flexible tubes are used to carry beer, soft drinks, potable water and gas throughout a dispense setup. In pub and bar environments, tubing is often used inside beer python systems, where multiple product lines and cooling lines run together between the cellar and the bar. These python bundles transport beer from kegs to taps while maintaining consistent temperature and pressure.
Available in multiple colours, LLDPE tubing allows easy identification of beverage lines, water feeds and gas supply lines within complex cellar installations. The tubing is commonly used in:
-
Beer python lines
-
Keg dispense systems
-
Soft drink dispense equipment
-
Coffee machines and espresso systems
-
Water filtration and reverse osmosis systems
-
Ice maker supply lines
This tubing is manufactured from non contaminating materials and is suitable for potable liquids, foodstuff applications and inert gases. It also offers compatibility with John Guest push-fit fittings, valves and connectors, enabling quick and reliable system assembly.
Grey Acetal Push-Fit Fittings for Drinks Dispense Systems
Grey acetal fittings are one of the most widely used connection types in beverage dispense systems. These push-fit fittings allow installers to connect tubing instantly without tools, creating a secure connection for liquids and in some cases gases such as CO2 or nitrogen mixes used in beer dispense systems.
Common fitting types include straight connectors, elbows, tees, reducers and threaded adaptors (available in BSP, BSPT and NPTF). These components allow technicians to route beer lines, connect regulators, link water filtration units or integrate coffee machines and vending equipment. These fittings are designed for use with beverage systems carrying beer, soft drinks, potable water and inert gases when installed according to system requirements. Push-fit connections create a leak tight seal and can be easily demounted for maintenance or equipment replacement.
Push-Fit Valves for Isolation and Flow Control
Valves play a crucial role in drinks dispense systems by allowing operators to isolate equipment, perform maintenance or prevent backflow. The John Guest valve range includes shut-off valves, service valves and check valves designed specifically for push-fit tubing systems.
Isolation valves are commonly installed on water feeds to coffee machines, water coolers and filtration systems, while check valves help prevent backflow in beverage or gas lines. Many of these valves feature quarter-turn operation for simple and reliable shut-off. They are typically used fully open or fully closed to temporarily isolate downstream equipment during servicing or maintenance.
Installation Accessories for Bar and Cellar Dispense Systems
Accessories ensure that push-fit drinks dispense systems remain secure, safe and easy to maintain. These components support installation, improve system reliability and help prevent accidental disconnection.
Common accessories include:
These small but important components are widely used in commercial drinks dispense installations, particularly in environments where equipment is frequently serviced or where multiple beverage lines run alongside each other.
Drinks Dispense Fittings and Tubing FAQs
What fittings are used for beer lines?
Beer lines in draught dispense systems are typically connected using push-fit fittings, commonly known as push-in or quick-connect fittings. John Guest push-fit connectors allow beer tubing to be installed quickly without tools, creating a secure leak-tight connection.
Common fittings used in beer dispense systems include:
-
-
-
-
Reducers for connecting different tube sizes
-
These fittings are widely used in pubs, bars and breweries because they allow fast installation and easy maintenance of beer dispense lines.
What is a beer Python system?
A beer python system is an insulated bundle of beer lines and coolant lines that runs between the cellar and the bar. The Python keeps beer at a consistent temperature while it travels from the keg to the tap.
Inside a Python bundle, you will typically find:
-
Multiple beer product lines
-
Cooling lines carrying chilled glycol or water
-
Insulation to maintain temperature
-
Tubing connections and fittings at each end
Push-fit connectors and LLDPE tubing are commonly used within Python systems because they provide reliable connections and are easy to service during bar installations or system maintenance.
How do you clean beer lines?
Cleaning beer lines is essential for maintaining beer quality and preventing bacterial build-up inside the tubing. In commercial pubs and bars, beer lines are typically cleaned every 1–2 weeks using specialist beer line cleaning chemicals.
A typical cleaning process includes:
-
Disconnect the beer line from the keg coupler.
-
Connect the line to a beer line cleaning bottle or pump.
-
Flush the system with a cleaning solution designed for draught beer systems.
-
Allow the cleaner to circulate through the lines and tap.
-
Flush the system thoroughly with clean water until all chemicals are removed.
-
Reconnect the beer line to the keg and test the dispense.
During cleaning, it is important to ensure the system is completely flushed, as leaving cleaning solution inside the tubing can affect flavour and damage equipment.
Push-fit fittings and connectors make beer line systems easier to dismantle for maintenance, allowing individual sections of tubing, valves or connectors to be removed and replaced if required.
What tubing is used for drinks dispense systems?
Most drinks dispense systems use
LLDPE tubing because it is flexible, durable and suitable for food and beverage applications. It is commonly used for:
-
Beer lines
-
Soft drink dispense systems
-
Water feeds to coffee machines
-
Vending machine water supplies
-
Reverse osmosis and filtration systems
-
Ice maker water lines
This tubing is designed to work with push-fit fittings and is available in multiple colours to help identify different beverage and gas lines within a system.
How do beer lines work?
A typical draught beer dispense system connects the keg in the cellar to the tap at the bar using tubing and push-fit fittings. A simplified beer line setup usually consists of the following components:
- Keg: The beer keg contains the beverage and sits in the cellar or refrigerated storage area.
- Keg coupler: The coupler attaches to the keg and allows beer and gas to enter and leave the keg.
- Gas line: A CO2 or mixed gas supply connects the regulator to the keg coupler. This pressure pushes beer out of the keg.
- Beer line tubing: Beer travels through food-grade tubing, often LLDPE tubing, from the keg to the bar tap.
- Beer python (long runs): In many pubs, the beer lines run through a Python system that bundles multiple product lines together with cooling lines to keep the beer cold while travelling to the bar.
- Push-fit fittings and connectors: Push-fit fittings such as straight connectors, elbows and threaded adaptors connect tubing sections and attach them to regulators, couplers and taps.
- Tap or font: The beer tap dispenses the drink at the bar.
Push-fit fittings are widely used in drinks dispense installations because they allow tubing to be connected instantly without tools, while still providing a secure and leak-tight connection.
John Guest drinks dispense systems provide a reliable and efficient way to install and maintain beverage lines in pubs, bars, restaurants and commercial beverage equipment. Using push-fit technology, tubing, fittings and valves can be connected quickly without tools, creating secure, leak-tight connections for beer, soft drinks, potable water and gas lines.
With components designed for compatibility with common tube sizes and threaded connections used in the drinks industry, these systems make installation, maintenance and upgrades straightforward. Whether you are building a new draught beer system, maintaining a cellar installation or connecting beverage equipment such as coffee machines or vending units, John Guest tubing, push-fit fittings, valves and accessories offer a dependable solution for professional drinks dispense systems.
