Paragon Underground Drainage Plain Ended Pipe

Plain at both ends, this PVC-U pipe forms the straight runs of a non-pressure, gravity-fed drainage system. It carries foul and surface water below ground between gullies, bends, junctions and inspection chambers. With no socket formed on either end, the pipe can be cut to length at any point, and each cut end remains a plain spigot ready to join into a socketed fitting. This makes it well suited to runs with frequent changes of direction or closely spaced fittings, where lengths are regularly trimmed on site.

The pipe is offered in 110mm and 160mm diameters, each in 3m and 6m lengths. The 6m length covers longer straight runs with fewer joints, while the 3m length is easier to handle and transport where access is restricted, such as around existing buildings on refurbishment work.

• Two sizes: Available in 110mm and 160mm, with a matching range of fittings for each size.
• Choice of lengths: Each size is available in 3m and 6m lengths, with the longer length reducing the number of joints needed on extended runs.
• Plain ended: Designed to connect into socketed fittings and double socket couplers of the matching size across the Paragon range.
• PVC-U construction: Manufactured from PVC-U, in line with the pipe and majority of fittings in the Paragon below ground range.
• Recognised standards: Manufactured in accordance with BS EN 1401-1, BS EN 13476-2 and WIS 4-35-01.
• Foul and surface water: Suitable for non-pressure foul and surface water disposal below ground.
• New build and refurbishment: Suited to round the house drainage on new build projects and to the refurbishment or replacement of existing drains.
• Terracotta finish: Matches the terracotta pipe and fittings throughout the Paragon 110mm and 160mm ranges.
• Made in Great Britain: Manufactured in Great Britain by Polypipe.