Paragon Aerosol Lubricant Spray

This silicone-based aerosol lubricant is designed for jointing push-fit ring seal pipe and fittings in the Paragon below ground drainage range. Applied to the spigot or the ring seal before assembly, it reduces friction as the pipe end enters the socket. This helps the spigot slide fully home and the seal seat correctly, without being dragged, rolled or displaced from its groove.

The aerosol format delivers an even coat around the full circumference of a spigot or seal, which is quicker and cleaner than applying lubricant by hand or brush, particularly on larger 160mm joints. As a concentrated lubricant, only a light application is needed per joint, so a single 400g can covers a substantial number of connections.

• Silicone-based formulation: Provides a smooth, low-friction surface for assembling push-fit ring seal joints.
• Paragon jointing: The lubricant specified in the Paragon below ground jointing method for spigots and ring seals.
• Aerosol application: Sprays an even coat around spigots and seals for quick, clean preparation of each joint.
• Concentrated formula: A light coat is sufficient, helping each can go further across a job.
• 400g Can: A practical size for site use across new build and refurbishment drainage installations.