Paragon Underground Drainage Single Socket Bend 45°

Combining a 45° change of direction with a spigot on one leg and a push-fit ring seal socket on the other, this bend is designed to connect straight into an adjacent socketed fitting. The chamfered spigot pushes directly into the socket of a second bend, a junction or a single socket pipe. This lets fittings be grouped tightly together where the layout leaves little room for pipe between them.

Two 45° bends joined spigot to socket give a compact, near-continuous turn. Pairing the bend with a double socket 45° bend allows an offset to be built without a connecting length. The shallower angle also makes it well suited to easing a run around obstacles close to a building, where an 87.5° bend would be too abrupt. The bend is available in 110mm and 160mm for non-pressure foul and surface water drainage.

• 45° angle: Provides a gradual change of direction for deviations, compact turns and offsets.
• Spigot and socket ends: One push-fit socket and one spigot allow the bend to connect directly into another fitting or socketed pipe.
• Chamfered spigot: The spigot end is moulded with a chamfer, ready for insertion into a ring seal socket.
• Close coupling: Joining straight into adjacent fittings removes the need for a short intermediate pipe length.
• Push-fit ring seal: The socket carries a ring seal for push-fit jointing, with no solvent cement required.
• Two sizes: Available in 110mm and 160mm, to suit the matching Paragon pipe diameters.
• Recognised standard: Manufactured in accordance with BS EN 1401-1.
• New build and refurbishment: Suited to round the house drainage on new build projects and to the refurbishment or replacement of existing drains.
• Made in Great Britain: Manufactured in Great Britain by Polypipe, and finished in terracotta.