Paragon Underground Drainage Single Socket Pipe

Each length of this PVC-U pipe has an integral push-fit ring seal socket formed at one end, with the opposite end left plain. Laid socket to spigot, consecutive lengths join directly into one another, so a straight drain run can be built up without a separate coupler at every joint. This keeps the number of components down on longer runs of non-pressure foul and surface water drainage.

Where a run needs shortening, the plain end can be cut to length while the socket end remains intact to receive the next pipe or a spigot fitting. The pipe is available in 110mm and 160mm diameters, each in 3m and 6m lengths, giving a choice between fewer joints on open runs and easier handling on constrained sites.

• Integral socket: A push-fit ring seal socket is formed at one end, allowing lengths to be jointed directly without a separate coupler.
• Two sizes: Available in 110mm and 160mm diameters.
• Choice of lengths: Each size is available in 3m and 6m lengths, with the longer length reducing the number of joints needed on extended runs.
• PVC-U construction: Manufactured from PVC-U, in line with the pipe and majority of fittings in the Paragon below ground range.
• Recognised standards: Manufactured in accordance with BS EN 1401-1, BS EN 13476-2 and WIS 4-35-01.
• Foul and surface water: Suitable for non-pressure foul and surface water disposal below ground.
• New build and refurbishment: Suited to round the house drainage on new build projects and to the refurbishment or replacement of existing drains.
• Terracotta finish: Supplied in terracotta, matching the Paragon 110mm and 160mm pipe and fittings.
• Made in Great Britain: Manufactured in Great Britain by Polypipe.