Paragon Underground Drainage Double Socket Equal Junction 45°

Connecting a 110mm branch into a 110mm main at 45°, this equal junction combines two push-fit ring seal sockets with a spigot outlet. The inlet and branch sockets receive plain ended pipe or spigot fittings. The chamfered spigot outlet pushes directly into the socket of the next pipe or fitting downstream, such as a single socket pipe, a bend or a chamber connection.

The spigot outlet allows the junction to be close-coupled to the following fitting, which is useful where a branch must join the main immediately before a bend, or just upstream of an inspection chamber. As with any 45° junction, the angled branch directs incoming flow along the line of the main, so connections from gullies, downpipes or stacks merge smoothly with the run.

• 45° branch: The angled branch merges incoming flow with the main run for a smooth connection.
• Equal junction: The branch matches the 110mm main, so the same pipe size is used on all three legs.
• Spigot outlet: The outlet inserts directly into the socket of the next pipe or fitting, with no short pipe length needed.
• Chamfered spigot: The spigot end is moulded with a chamfer, ready for insertion into a ring seal socket.
• Push-fit ring seal: The inlet and branch sockets carry ring seals for push-fit jointing, with no solvent cement required.
• Recognised standard: Manufactured in accordance with BS EN 1401-1.
• New build and refurbishment: Suited to round the house drainage on new build projects and to the refurbishment or replacement of existing drains.
• Made in Great Britain: Manufactured in Great Britain by Polypipe, and finished in terracotta.