RIIFO MLCP Bevelling Tool

Following on from cutting, this tool carries out the second stage of pipe preparation, rounding and chamfering the cut end before it's pressed into a fitting. A pipe that's gone slightly out of round after cutting, or left with a sharp edge on the inside, can damage the O-rings inside a fitting as it's inserted. The tool is pushed fully onto the pipe end and rotated several times, restoring roundness.

Each tool covers a small group of adjacent sizes, so one unit can move between the more common pipe diameters found on a typical job without needing a separate tool for every size. Once bevelled, the pipe should be visually checked to confirm the bevel is even all the way round before moving on to the press connection itself.

Compact and straightforward to use, this tool sits between the pipe cutter and the pressing stage, forming a small but important part of preparing multilayer pipe correctly before installation.

• Restores pipe roundness: Corrects any out-of-round pipe left after cutting, ensuring a proper fit into the fitting.
• Creates a clean bevel: Chamfers the pipe end to prevent damage to the fitting's O-rings during insertion.
• Covers multiple sizes per tool: Each tool spans a small group of adjacent diameters, reducing the number of tools needed on site.
• Essential second step: Bridges the gap between cutting and pressing in the pipe preparation sequence.