Paragon Underground Drainage Single Socket Bend 30°

A shallow 30° turn is paired here with one spigot end and one push-fit ring seal socket, allowing the bend to plug directly into neighbouring fittings for small corrections to a drain's line. The chamfered spigot inserts into the socket of a single socket pipe, a double socket bend or a junction. This means a slight change of direction can be made right at a fitting rather than further along the run.

This makes it well suited to angling a branch or outgoing pipe a few degrees to line up with a chamber connection or existing drain, without adding a short length of pipe. Two single socket 30° bends joined spigot to socket give a combined 60° turn in a compact arrangement. The socketed leg accepts plain ended pipe or a spigot fitting in the usual way.

• 30° angle: A shallow change of direction for fine corrections to the line of a run.
• Spigot and socket ends: One push-fit socket and one spigot allow the bend to connect directly into another fitting or socketed pipe.
• Chamfered spigot: The spigot end is moulded with a chamfer, ready for insertion into a ring seal socket.
• Close coupling: Joining straight into adjacent fittings removes the need for a short intermediate pipe length.
• Push-fit ring seal: The socket carries a ring seal for push-fit jointing, with no solvent cement required.
• Two sizes: Available in 110mm and 160mm, to suit the matching Paragon pipe diameters.
• Recognised standard: Manufactured in accordance with BS EN 1401-1.
• New build and refurbishment: Suited to round the house drainage on new build projects and to the refurbishment or replacement of existing drains.
• Made in Great Britain: Manufactured in Great Britain by Polypipe, and finished in terracotta.