Paragon Underground Drainage Rainwater Adaptor

This adaptor makes the transition from a 68mm rainwater downpipe into 110mm below ground drainage, allowing roof water to be taken directly into the underground system at the foot of the downpipe. It provides a dedicated connection between the two pipe sizes. The downpipe can therefore discharge straight into the drain rather than onto the surface or into an open gully.

The adaptor is typically fitted at ground level at the base of a downpipe, connecting into a 110mm socket on a bend, rest bend or length of pipe leading down to the surface water run. Taking rainwater into the drain this way keeps the connection enclosed and helps prevent debris entering the system at the base of the downpipe.

• Downpipe connection: Connects a 68mm rainwater downpipe directly into 110mm below ground drainage.
• Enclosed discharge: Takes roof water straight into the drain at the foot of the downpipe, with no open gully needed.
• 110mm connection: Joins into Paragon 110mm below ground pipework and fittings.
• Compact fitting: A short, low-profile adaptor for a neat finish at the base of the downpipe.
• New build and refurbishment: Suited to round the house drainage on new build projects and to the refurbishment or replacement of existing drains.
• Made in Great Britain: Manufactured in Great Britain by Polypipe, and finished in terracotta.