Plasson Elbow 22.5

• Material: PE100 Polyethylene
• Pressure Rating: PN16 (16 bar)
• Terminal Pins: 4mm electrofusion terminals (standard size)
• Application: Joins two MDPE pipes of the same diameter at a 22.5° angle
• Use: For cold water systems only
• WRAS Approved: Yes – suitable for potable water use
• Standards Compliance: BS EN 1555, BS EN 12201, WIS 4-32-14
   

The Plasson Electrofusion Elbow 22.5° is designed to connect two equal-diameter MDPE pipes at a slight angle using electrofusion welding. This fitting provides a controlled 22.5° directional change, ideal for pipeline routing where gentle bends are required to avoid pressure loss or accommodate existing infrastructure.

Made from PE100 polyethylene and PN16 pressure rated, this fitting ensures a durable, watertight connection. Supplied with standard 4mm terminal pins, it is fully compatible with common electrofusion welding units and is WRAS approved for use in potable water applications.

• Precise 22.5° Bend: Facilitates gradual directional changes in pipeline layout
• Strong & Durable: PE100 body for long-lasting performance in water systems
• WRAS Approved: Certified for use in drinking water networks
• Leak-Free Performance: Creates a permanent, secure seal with proper welding
• For Water Use Only: Not suitable for gas or chemical installations