Plasson Duckfoot Elbow 90
Technical Specification
- Material: PE100 Polyethylene
- Pressure Rating: PN16 (16 bar)
- Terminal Pins: 4mm electrofusion terminals (standard size)
- Application: Joins two MDPE pipes of the same diameter at a 90° angle, with support foot
- Use: Cold water systems only
- WRAS Approved: Yes – certified for potable water
- Standards Compliance: BS EN 1555, BS EN 12201, WIS 4-32-14, WIS 4-32-15
Description
The Plasson Duckfoot Electrofusion Elbow 90° is a specialist fitting designed to connect two equal-diameter MDPE pipes at a right angle via electrofusion, while also incorporating a support foot for stability. This makes it especially suitable for installations where pipework requires additional anchoring, such as meter installations, above-ground setups, or change-of-direction junctions with structural load concerns.
Manufactured from PE100 polyethylene and PN16 pressure rated, the fitting is WRAS approved for use in potable water systems and features 4mm terminal pins for compatibility with standard electrofusion equipment.
Key Features & Benefits
- Integrated Support Foot: Provides stability for installations requiring fixed support
- Precise 90° Bend: Ideal for directional changes in structured water system layouts
- Durable PE100 Construction: Withstands high pressure and environmental conditions
- Permanent, Leak-Free Joint: Ensures a secure and long-lasting fusion seal
- Water Use Only: Not suitable for gas or chemical applications
| SKU | Size (mm) |
| 370649 | 90 |
If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.
