Paragon Underground Drainage Triple Socket Unequal Junction 45°

This unequal junction brings a 110mm branch into a 160mm main at 45°, combining a change of size and a branch connection in one fitting. It is typically used where individual 110mm drains, such as those from gullies, downpipes or a soil stack, join a larger 160mm main serving several connections. A separate reducer is not needed on the branch.

The main inlet and outlet carry 160mm push-fit ring seal sockets, which accept 160mm plain ended pipe or spigot fittings. The branch carries a 110mm socket for 110mm pipe or spigot fittings. The 45° entry directs flow from the smaller branch along the line of the main, so the two streams merge smoothly.

• Size and branch in one: Connects a 110mm branch directly into a 160mm main without a separate reducer.
• 45° branch: The angled branch merges incoming flow with the main run for a smooth connection.
• Triple socket design: 160mm sockets on the inlet and outlet and a 110mm socket on the branch accept plain pipe ends or spigot fittings with no couplers.
• Push-fit ring seal: Each socket carries a ring seal for push-fit jointing, with no solvent cement required.
• Recognised standard: Manufactured in accordance with BS EN 1401-1.
• New build and refurbishment: Suited to round the house drainage on new build projects and to the refurbishment or replacement of existing drains.
• Made in Great Britain: Manufactured in Great Britain by Polypipe, and finished in terracotta.