MDPE Tee Flange Adaptor
Technical Specification
- Type: 90° Compression Tee with Flange Adaptor
- Connection Type: Compression x Flange
- Approvals: WRAS
- Size Range: 50mm x 2" to 110mm x 4"
- Material Composition:
- Body: High-impact polypropylene (UV stabilised)
- Grip Ring: Acetal resin (POM)
- Seal: Nitrile rubber (NBR)
- Operating Pressure: Up to 16 bar at 20°C (size dependent)
- Temperature Range: -10°C to +60°C
- Flange pattern: EN 1092-1, ISO 7005-1
- Pipe Compatibility: MDPE pipe of matching outer diameter
Liner Requirement: Pipe liners (stiffeners) are strongly recommended for all compression joints
Description
The MDPE Compression Tee Flange Adaptor is specifically designed to connect two lengths of MDPE pipe to a flanged outlet at a 90° angle. This fitting allows for an efficient branching point within a pipe system, particularly where MDPE must integrate with flanged valves, pumps, or other equipment. Manufactured using glass-fibre reinforced polyamide and equipped with steel reinforcement pins, it delivers exceptional strength and performance under pressure. It is ideal for water supply, irrigation, and civil infrastructure applications. For optimal performance and joint integrity, the use of pipe liners (stiffeners) is strongly recommended.
Key Features & Benefits
- Integrated 90° Branching Connection: Connects two MDPE pipes to a flanged system component, allowing system branching in compact or structured installations.
- Reinforced Composite Structure: Glass-fibre reinforced polyamide with steel pins ensures exceptional strength and long-term dimensional stability.
- Leak-Free Compression Seal: Nitrile rubber gasket and acetal grip ring provide excellent sealing performance even under high pressure.
- Corrosion and UV Resistance: Suitable for exposed and buried use in a wide range of environments.
- Quick and Simple Installation: Push-fit compression design enables fast assembly with no disassembly or special tools required.
- Pipe Liner Compatible: Recommended use of stiffeners ensures proper sealing and reinforcement of MDPE pipe ends.
Dimensions
| SKU | Manufacturer Code | Size | D (mm) | L (mm) | I (mm) | L1 (mm) | H (mm) | d (mm) | d1 (mm) | F (mm) | DN |
| 360374 | 54980-7-G | 50 x 2" | - | - | - | - | - | - | - | - | - |
| 360375 | 54980-8-G | 63x2” | 110.5 | 295 | 112.5 | 84 | 17.5 | 77 | 103 | 165 | 50 |
| 360377 | 54980-9-L | 75 x 3" | - | - | - | - | - | - | - | - | - |
| 360378 | 54980-10-L | 90x3” | 150 | 404 | 153.5 | 150 | 20 | 108 | 138 | 200 | 80 |
| 360379 | 54980-10-M | 90x4" | 150 | 404 | 153.5 | 140 | 24 | 131 | 158 | 220 | 100 |
| 360380 | 54980-11-M | 110x4” | 176.5 | 480 | 183.5 | 128 | 24 | 131 | 158 | 220 | 100 |
If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.
