Screwdriver Adjusted Banjo Flow Control

Useful Information

All text and product images are the intellectual property and copyright of Pipestock Limited

Key Features / Tech Specs:

  • Material: Acetal
  • Metric tube connection
  • Metric and BSPP thread
  • Suitable for soft metal and plastic tubing
  • Pressure rated to 10 bar
  • Temperature range: 5°C to 70°C

Useful Info:

These banjo flow control units are used for the regulation of the speed of pneumatic cylinders and actuators. This model is adjusted by a screwdriver and is available with both metric and BSPP threads.

These fittings are manufactured from an Acetal copolymer, brass, stainless steel and nitrile. The maximum torque values of these fittings vary from 1.5Nm on our M5 fitting and 4.0Nm on the 1/8" fittings while others should not exceed 10Nm. The supply of air to the flow control should be filtered to 50 micron.

 

If you require any further information then don’t hesitate to ring us here at Pipestock on 0845 634 1053. We’re always happy to help!

Grouped product items
CodeProduct NameList PriceYou SaveYou Pay Quantity
382078JG Screw Banjo Flow Control Tube x Metric 4mm x M5 £19.75 30% £13.83
382079JG Screw Banjo Flow Control Tube x BSPP 4mm x 1/8" £21.35 30% £14.95
382080JG Screw Banjo Flow Control Tube x BSPP 6mm x 1/8" £20.00 30% £14.00
382081JG Screw Banjo Flow Control Tube x BSPP 6mm x 1/4" £21.35 30% £14.95
382082JG Screw Banjo Flow Control Tube x BSPP 8mm x 1/4" £21.35 30% £14.95
382083JG Screw Banjo Flow Control Tube x BSPP 10mm x 3/8" £26.80 30% £18.76
382084JG Screw Banjo Flow Control Tube x BSPP 12mm x 1/2" £33.40 30% £23.38