Grab Adhesive

• Manufactured by Gorilla
• Fast grab
• Indoor/outdoor use
• Fills gaps
• High strength
• Flexible

Gorilla grab adhesive contains no water or solvents, reducing the chances of a weaker bond over time. It is a versatile adhesive and can be used on a variety of surfaces with instant effect. It can withstand temperatures between -40°C and 93°C but should be applied between temperatures of 10°C and 38°C.

This easy-flow formula is supplied in 290ml cartridges and is an easy to use adhesive due to its flexibility and versatility. It can be used indoors or outdoors and is even capable of use underwater.

When applying this grab adhesive ensure surfaces are clean of dust or grease. Where gluing uneven or rough surfaces be sure to apply enough to fill all gaps. Press the two surfaces you wish to connect together for 20 to 60 seconds after application (heavier items may require temporary support). The adhesive will skin over between 10 and 40 minutes depending on conditions and will form a fully cured solid bond after 24 hours (longer in humid environments or at lower temperatures).

Upon completion, Gorilla grab can be sanded and painted but not stained.

Not suitable for use with polyethylene, polypropylene, Teflon or Bitumen. Not recommended for use with PVC pipe.