MDPE Reducing Tee

• Type: Compression Reducing Tee
• Connection Type:
• 2 x Compression ends for MDPE pipe (same diameter)
• 1 x Compression branch for smaller diameter MDPE pipe
• Available Sizes: 25mm x 20mm x 25mm to 63mm x 50mm x 63mm
• Material Composition:
• Body: High-impact black polypropylene (UV stabilised)
• Gasket: Black nitrile rubber (NBR)
• Grip Ring: Acetal resin (POM)
• Nut: Polypropylene
• Guard Ring: Stainless steel (on selected sizes)
• Operating Pressure: Up to 16 bar at 20°C
• Temperature Range: -10°C to +60°C
• Standards Compliance: ISO 17885, UNI EN 12201
• Pipe Compatibility: MDPE pipes of matching outer diameter (as specified)

Liner Requirement: Use of pipe liners (stiffeners) is strongly recommended

The MDPE Compression Reducing Tee is designed to create a reliable junction between two MDPE pipes of the same diameter and a third, smaller MDPE branch pipe at a 90° angle. This fitting is ideal for systems requiring a reduction in branch size without compromising joint strength or water-tightness. Suitable for both above-ground and buried applications, it is widely used in water distribution, irrigation, and infrastructure pipe networks. For maximum sealing integrity, the use of pipe liners (stiffeners) is strongly recommended.

• Branch Reduction Capability: Facilitates a secure and compact branch connection to a smaller MDPE pipe.
• Secure Compression Joint: Push-fit ends ensure easy assembly and robust performance without disassembly.
• UV-Stabilised and Corrosion-Resistant: Ideal for both buried and exposed installations, offering long-term environmental resistance.
• High Seal Integrity: Sealing system includes nitrile rubber gaskets and acetal grip rings for leak-free operation.
• Quick and Tool-Free Installation: Designed for convenience and speed—no welding, adhesives, or special tools required.
• Optimised with Pipe Liners: Stiffeners are advised to maintain pipe shape and reinforce the seal, especially under pressure or thermal stress.