Login / Register
Pressure Relief Valve Brass
Useful Information
This product is supplied with two PVC composite unions and is suitable for use with nominal bore PVC pipe.
It is suitable for use as a bypass valve, however should not be used as a safety valve.
The composite unions are supplied unassembled. We recommend using PTFE tape when fitting them to the valve.
PVC solvent cement should be used along with cleaner to glue the plain end and the pipe together.
| Adjustable pressure | 0.5 to 10 bar |
| Working temperature | 5°C - 60°C |
| Standards | Complies to PED 97/23/EC |
| Number | Part Name | Material |
| 1 | Nut and Locknut | Brass |
| 2 | Housing Cap | Brass |
| 3 | Regulator | Brass |
| 4 | Locknut Regulator | Brass |
| 5 | Regulator Seat | Brass |
| 6 | Spring Pusher | Brass |
| 7 | Bonnet | Brass |
| 8 | Spring | Steel |
| 9 | Gasket | Pressed Fibre |
| 10 | O-Ring | EPDM Rubber |
| 11 | Rod | Brass |
| 12 | Valve Seat | Brass |
| 13 | Valve Gasket | EPDM Rubber |
| 14 | Valve Nut | Brass |
| 15 | Body | Brass |
IMPORTANT: The technical data given on this website is for preliminary information purposes only and is published without guarantee. All line drawings are for illustrative purposes only and should not be regarded as wholly accurate in every detail. We reserve the right to withdraw or to alter the specification of any product without notice. For more information, please consult our Terms of Business.
If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.
