All text and product images are the intellectual property and copyright of Pipestock Limited

BSI Kitemark Approved Product - sold by PipestockKey Features / Tech Specs:

  • Material: polyvinyl chloride – unplasticised (PVCu)
  • Operating temperature: 5°C to 60°C
  • BSI Kitemark (licence number KM 60041)
  • All fittings comply to BS 3505 pipe and BS 4346 pipe fitting standards and EN 1452 Parts 1, 2 and 3
  • Not suitable for use with compressed air

Basic Fitting Guidelines:

An extensive range of threaded fittings are available mostly having parallel threads to relevant standards. Tightening of threads should only be done by hand or at most by an extra quarter turn with a strap wrench.

Extra care must be taken not to over tighten or damage the fitting component. Pipe wrenches must not be used in any circumstances.

It is recommended that PTFE tape should be used in the jointing of threaded fittings to complete a satisfactory seal.

Please note, under no circumstances should a sealing paste be used as this can damage both PVC and ABS products.

Useful Info:

Threaded PVC fittings are used to connect two BSP threaded fittings together.


If you require any further information then don’t hesitate to ring us here at Pipestock on 0845 634 1053. We’re always happy to help!

More Info Click to Close