Login / Register
Reducing Tee 90°
Useful Information
Key Features / Tech Specs:
- Grip and seal connection
- WRAS approved:
- Speedfit (Approval number 1809901)
- Twist & Lock (Approval number 1904906)
- Pipe inserts must be used
Technical Info:
| Twist & Lock | John Guest | |
| Max. Working Pressure | 12 bar @ 20°C | 12 bar @ 20°C |
| Max. Working Temperature | 82°C | 95°C |
| Material | Polyethylene | Acetal |
| Inserts Required | YES | YES |
| Tools Required | NO | NO |
| Colours Available | White & Grey | White |
| Sizes Available (mm) | 10, 15, 22, 28 | 10, 15, 22, 28 |
| Compatible Pipe | PEX, PB, Copper, CPVC | PEX, PB, Copper |
| Demountable | YES | YES |
| Visible Connection Indicator | YES | NO |
| Approvals | WRAS | BSI, WRAS & FDA |
Useful Info:
| Product Code | A - Pipe Diameter (mm) | B - Pipe Diameter (mm) | C - Pipe Diameter (mm) |
| 374144 | 22 | 15 | 15 |
| 374143 | 22 | 22 | 15 |
| 378257 | 15 | 15 | 22 |
| 378259 | 22 | 15 | 22 |
| 378260 | 22 | 22 | 15 |
| 378261 | 28 | 22 | 28 |
| 378262 | 28 | 28 | 22 |
| 409537 | 15 | 15 | 22 |
| 409538 | 22 | 15 | 22 |
| 409539 | 28 | 28 | 15 |
| 409540 | 28 | 28 | 22 |
| 409541 | 28 | 22 | 22 |
| 409542 | 28 | 22 | 28 |
These tees are used for the connection of a different sized diameter piece of plastic or copper pipe at a 90° angle off of a run of pipe.
The push-in end of the fitting works simply by loosening the nut slightly, inserting the pipe complete with pipe insert and then tightening the nut to lock the pipe in place. To demount the components, ensure that the system has been depressurized, loosen the nut at the end you wish to remove and push the collet towards the body of the fitting, pulling the pipe to release.
This push-in technology is designed for use with multiple applications including hot and cold plumbing as well as central heating.
Suitable for use with Polyethylene (PEX), Polybutylene (PB) and Copper pipe systems.
Not for use with gas, fuel, oil or compressed air applications.
IMPORTANT: The technical data given on this website is for preliminary information purposes only and is published without guarantee. All line drawings are for illustrative purposes only and should not be regarded as wholly accurate in every detail. We reserve the right to withdraw or to alter the specification of any product without notice. For more information, please consult our Terms of Business.
If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.
