MDPE Push Fit Coupling PE x Copper

• Type: Push Fit Coupling – MDPE to Copper
• Connection Type:
• 1 x Compression push-fit (MDPE pipe)
• 1 x Push-fit (copper pipe)
• Material Composition:
• Body: High-impact polypropylene
• Seal: Nitrile rubber (NBR) (varies by design)
• Pressure Rating: Up to 16 bar at 20°C
• Temperature Range: 0°C to +40°C (cold water only)
• Standards Compliance: ISO 14236, Kiwa approved for potable water
• Pipe Compatibility: MDPE pipe (outer diameter matched), Copper pipe (standard sizes)
• Gas Use: Not suitable for gas applications

Liner Requirement: Pipe liners (stiffeners) are strongly recommended for MDPE connection

The MDPE Push Fit Coupling PE x Copper is designed to securely join MDPE pipe to copper pipe in potable cold water systems. This push-fit style fitting offers a quick, tool-free connection and is ideal for installations where different pipe materials need to be joined with minimal effort. Manufactured from high-grade polypropylene and Kiwa approved, it ensures reliable performance in both domestic and commercial water supply applications. For best results, a pipe liner (stiffener) should be used with the MDPE side. Please note: this fitting is not suitable for gas applications.

• Mixed-Material Connection: Allows secure joining of MDPE to copper pipe for cold water distribution systems.
• Quick Push-Fit Assembly: No disassembly or tools required—ideal for on-site installation and retrofitting.
• Strong Mechanical Seal: Delivers a pressure-resistant, watertight connection with the correct use of the pipe liner.
• Kiwa Approved: Safe for use in potable water systems when installed according to guidelines.
• Robust and Corrosion-Resistant: UV-stabilised polypropylene body withstands impact and environmental exposure.
• Pipe Liner Compatible: Stiffeners recommended to support MDPE pipe ends and enhance joint stability.