MDPE Push Fit Adaptor Female x Copper

• Type: Push Fit Adaptor – Female x Copper
• Connection Type:
• 1 x Mechanical grip (for copper pipe)
• 1 x Female BSP thread
• Material Composition:
• Body: UV-stabilised polypropylene
• Seal: Nitrile rubber (NBR)
• Grip Ring: Stainless steel or acetal resin (depending on size)
• Pressure Rating: Up to 16 bar at 20°C
• Temperature Range: 0°C to +40°C (cold water applications only)
• Standards Compliance: ISO 14236, Kiwa approved
• Pipe Compatibility: Copper pipe to male BSP threaded fittings

Liner Requirement: Pipe liners (stiffeners) are strongly recommended when connecting to MDPE

The MDPE Push Fit Adaptor Female x Copper is designed to connect a copper pipe to a male BSP threaded fitting, forming a secure and watertight joint. This fitting is ideal for integrating copper pipework into threaded water systems, including potable water and irrigation applications. With a mechanical grip for the copper pipe and a female BSP threaded outlet, this adaptor is Kiwa approved and simple to install. For enhanced sealing and structural integrity, a pipe liner (stiffener) is strongly recommended when used with MDPE components.

• Copper to Threaded Connection: Connects copper pipe to a male BSP threaded fitting securely and efficiently.
• Easy Mechanical Installation: Tool-free connection—just push and tighten, with strong end-load resistance.
• Durable, UV-Stabilised Body: Resistant to corrosion, impact, and environmental stress for long-term use.
• Potable Water Approved: Kiwa certified for drinking water applications and pressure-rated to 16 bar.
• Enhanced Sealing Performance: Nitrile rubber seal provides a dependable leak-free joint when used with pipe liners.
• Compatible with Pipe Liners: Recommended when transitioning between copper and MDPE for joint reinforcement.