Login / Register
Philmac Slip Joiner
Useful Information
Key Features / Tech Specs / Dimensions:
- Manufactured by Philmac
- Materials: Body (polypropylene), Nut (acetal), Split Collet (acetal), Seal (nitrile rubber)
- WRAS approved
- Conforms to AS/NZS 419, AS/NZS 4020, BS 6920, ISO 14236
- Max. Pressure 16 bar up to 63mm / 2" (Above 63mm = 10 bar)
- Suitable for MDPE and HDPE
Technical Info:
| Product Code | Size (mm) | Size (inch) | S (mm) | D (mm) | L (mm) | Weight (kg) |
| 355241 | 20 | ½ | 10 | 47 | 90 | 0.08 |
| 355242 | 25 | ¾ | 11 | 55 | 97 | 0.12 |
| 355243 | 32 | 1 | 14 | 67 | 118 | 0.2 |
| 355244 | 40 | 1¼ | 18 | 81 | 136 | 0.33 |
| 355245 | 50 | 1½ | 24 | 94 | 161 | 0.52 |
| 355246 | 63 | 2 | 29 | 110 | 182 | 0.76 |
Useful Info:
This Philmac slip joiner compression fitting is used to connect two lengths of MDPE pipe together. It has no central stop so is able to move up and down a pipe.
The pipes to be joined must be of the same diameter.
IMPORTANT: The technical data given on this website is for preliminary information purposes only and is published without guarantee. All line drawings are for illustrative purposes only and should not be regarded as wholly accurate in every detail. We reserve the right to withdraw or to alter the specification of any product without notice. For more information, please consult our Terms of Business.
If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.
