M Swivel Tee Run

Skip to the beginning of the images gallery

Useful Information

Key Features / Tech Specs:

Manufactured by John Guest
Metric tube x Male BSPT tee run
Pressure rated to 16 bar
Maximum temperature: 65°C
FDA approved

Useful Info:

Product Code	To Suit Hose O.D (mm)	Run Thread (inch)	Max. Bar up to 20°C	Max. Bar at 65°C
381735	6	1/8	16	10
381738	8	1/4	16	10
381740	10	3/8	10	7
381741	12	3/8	10	7
381742	12	1/2	10	7

These 90° tees have a push-in tube end suited to tubing with an outer diameter of 4mm to 12mm while the threaded end off of the tee's run is 1/8" to 1/2" in diameter.

The BSPT threaded ends of these Acetal fittings are designed to be hand tightened and have a maximum torque value of 1.5Nm on 1/8" fittings and 3.0Nm up to 1/2" fittings. Overtightening of the fittings can result in undue stress and failure. They can be used within compressed air or pneumatic flow and vacuum systems.

Tube inserts must be used with pneumatic applications where pressures are in excess of 10 bar; you should not exceed 16 bar. Suitable for use with Polyethylene, Polyurethane, Nylon tubing as well as soft metal tubings such as copper or mild steel.

If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.

More Info