Please note:- these fittings are only compatible with the 100R6 hose.
With the self-gripping tail, these fittings eliminate the need for swaged ferrules.
These hose fittings are available in a range of BSPP, metric DIN 2353 and JIC threads.
Basic Fitting Guidelines:
Cut the hose to the required length. For a clean, square cut, use a hose cutter.
Lubricate the hose fitting with soapy water or a light oil. Do not use grease or a heavy oil.
Insert the fitting barb into the hose.
Place the fitting against a flat, vertical surface. Steadily push the hose over the fitting until it reaches the end and is completely concealed by the red cap. Do not use hose clamps as they may reduce the sealing integrity.
If you require any further information then don’t hesitate to ring us here at Pipestock on 0845 634 1053. We’re always happy to help!