Airpipe Fittings Gen 4

All text and product images are the intellectual property and copyright of Pipestock Limited

AIRpipe compressed air pipework - sold by PipestockKey Features / Tech Specs:

  • Manufactured by AIRpipe
  • Material: aluminium, polymer, carbon steel or stainless steel, dependent on fitting
  • All materials are non-flammable
  • Plain ended and threaded connections available
  • Quick and simple connection
  • 4th generation of pipe connection design uses pipe clamps, surface sealing ring and convex pipe
  • Performance is more reliable and life time doubled compared with generation 3 fittings.

Basic Fitting Guidelines:

It is always important to read the manufacturer's instructions on how to install AIRpipe fittings. The following procedure is a guideline only and involves the following basic steps:

  1. Mark the aluminium pipe at the S position (according to the diagram and table below) using a marking tool.
  2. Loosen the nut or screw by one or one-and-a-half turns, then insert the pipe. Ensure the pipe is inserted up to the mark made in step 1.
  3. Tighten the fitting with a torque wrench.

AIRpipe Fittings - from Pipestock

 

Diameter (mm) S Length (mm)
20 49
25 62
40 98
50 112
63 90
80 115

 

Useful Info:

All AIRpipe fittings can be disconnected and later reused, resulting in greater flexibility and cost savings.

The drop-downs can be fitted at any time and will adapt to changes in the production line.

All of the aluminium fittings have a grey protective coating on the outside.

 

If you require any further information then don’t hesitate to ring us here at Pipestock on 0845 634 1053. We’re always happy to help!