MDPE Ball Valve

MDPE » MDPE Valves » MDPE Ball Valve

This is a double union MDPE Ball Valve, It just requires a 1/4 turn to either fully open or fully close the valve. It has a locking end which enables you to adjust the torque on the ball in the valve, depending on the water pressure. Before assembly you should always check the locking end and tighten if necessary, if it's too loose the valve will leak. The handle of the valve can be removed and acts as a spanner to tighten the locking end. The locking end is a reverse thread. If you need any further help please call our sales team. Each valve also requires two Pipe Stiffeners.

Code Product Name
 List Price You Pay You Save Buy Qty
PPB50Q0200 PP Ball Valve Compression Joint EPDM 20mm £18.78 £9.39 50%
PPB50Q0250 PP Ball Valve Compression Joint EPDM 25mm £25.13 £12.57 50%
PPB50Q0320 PP Ball Valve Compression Joint EPDM 32mm £34.00 £17.00 50%
PPB50Q0400 PP Ball Valve Compression Joint EPDM 40mm £40.22 £20.11 50%
PPB50Q0500 PP Ball Valve Compression Joint EPDM 50mm £60.18 £30.09 50%
PPB50Q0630 PP Ball Valve Compression Joint EPDM 63mm £66.71 £33.36 50%
Displaying 1 to 6 (of 6 products)
Result Pages:  1 
MDPE Ball Valve
MDPE Ball Valve - MDPE Pipework
Copyright © 2004-2012 Pipestock Limited
22 May, 2012
24842759 requests since 01 May, 2004