Compression Fittings
Please note: Only authorised and competent operatives should work on the gas network.
Gas Compression Fittings are simple and easy to install. They have a number of advantages over Gas Electrofusion Fittings, such as:
Pipestock hold large stocks of Gas Compression Fittings in sizes 20mm, 25mm, 32mm & 63mm. With our other matching ranges such as Gas Pipe Coils, Gas Pipe Lengths and Gas Pipe Caution Tape, Pipestock have all you need for your gas installation.
Each fitting is individually bagged, including the necessary liners & instructions. Installation doesn’t get any easier than this.
Standards
Meets the test criteria stipulated by Transco and the technical advisory body, Advantica.
Philmac Gas is designed for use with both mains and LPG gas.
PREN : 1555-3 : 1999.
Hydrostatic strength tests : 100 hrs, 160 hrs and 1000 hrs.
ISO 10838 - 1 : 2000 (E).
Leak tightness with bending and pressure cycling
Leak tightness with tensile testing
Size range 20mm to 63mm
Gas Compression Fittings are simple and easy to install. They have a number of advantages over Gas Electrofusion Fittings, such as:
- Instant installation - no cure time
- Can be installed in any weather conditions
- Doesn’t require cumbersome installation equipment
- No electricity required on site
- Allows connection between pipes of a different SDR rating
Pipestock hold large stocks of Gas Compression Fittings in sizes 20mm, 25mm, 32mm & 63mm. With our other matching ranges such as Gas Pipe Coils, Gas Pipe Lengths and Gas Pipe Caution Tape, Pipestock have all you need for your gas installation.
Each fitting is individually bagged, including the necessary liners & instructions. Installation doesn’t get any easier than this.
Standards
Meets the test criteria stipulated by Transco and the technical advisory body, Advantica.
Philmac Gas is designed for use with both mains and LPG gas.
PREN : 1555-3 : 1999.
Hydrostatic strength tests : 100 hrs, 160 hrs and 1000 hrs.
ISO 10838 - 1 : 2000 (E).
Leak tightness with bending and pressure cycling
Leak tightness with tensile testing
Size range 20mm to 63mm
